Back and sides made of thermomodified flamed walnut using composite technology and a slightly curved spruce top with "Torres" bracing. The grenadilla-reinforced thermomodified alder neck has a 64 cm scale length, 50 mm nut width and a slightly curved fingerboard with a 30-inch radius. This model is equipped with our "new FusionCut", which seamlessly merges with a very flat stick into the cutaway turned up towards the bottom side.

During development, emphasis was placed on building a very easy-to-play nylon string guitar for the crossover guitarist. In addition, it can impress acoustically with a good response, a warm "nylon tone" and the ability to create many timbres.

Built into this instrument is a passive piezo pickup under the bridge saddle, newly developed by Udo Rösner and a 6.3 mm stereo jack socket on the side joint/bottom block of the guitar.

Special electronics in the pedal act as a preamplifier. Is is connected to the guitar using the included stereo jack cable (straight/angle). The mobility (resistance of the pedal) can be easily adjusted using two accessible screws. The pedal preamplifier can be operated either with the included power supply or as a backup, with a 9V block battery. The casing and mechanics of the pedal are manufactured in-house.

Whether you want to switch between solo and accompaniment, use vibrato and pulse effects, or extend the resonance of certain chords and tones - this newly developed pedal responds with great sensitivity and precision. The guitarist can easily adjust the volume while playing and thanks to the built-in preamp and filter, the system delivers a very dynamic and detailed signal that can even rival microphones.

Our collaboration with Udo Rösner has renewed an existing acoustic amplifier. The "Hanika Da Capo 75" is a 2-channel acoustic combo. It has been equipped with a custom-built 8-inch speaker and features a 3-band EQ on each channel as well as six effects, 48-volt phantom power and low-cut. The very elegant looking casing made of flamed walnut or thermal walnut is also built in-house.


Soundboard wood Spruce, Grade 3
Back wood Flamed walnut, thermomodified
Neck wood Alder thermomodified/ African blackwood
Fretboard wood African blackwood, Grade 3
Neck profile C-1,5mm
Soundboard bracing 7-fold, symmetrical, domed
Soundhole rosette flamed walnut, thermomodified
Soundboard binding Fibre
Back binding fibre
Head plates, front Flamed walnut, thermomodified
Head plates, back Flamed walnut, thermomodified
Bridge Plum thermomodified
Scale 64cm
Fretboard width 50mm / 40mm
Tuning machines Rubner R2-E
Body finish HE high-gloss finish
Soundboard finish HE matt finish
Case / bag Hanika GigBag
Amp 1 2-channel acoustic combo
Amp 2 3-band EQ, 6 effects, low-cut
Pedal 1 preamplifier with volume control
Pedal 2 Insert, DI-out

* This information sets out the standard configuration. Individual dimensions are also possible with custom options. You'll find more information about the custom options on the ‘Options’ page. Specifications apply to the current model year.


Hanika-RECITAL LINE-CrossOver-Kopf
Head plate
Hanika-RECITAL LINE-CrossOver-Cutaway-fuer-leichtes-Greifen
Cutaway for easier grip
Hanika-RECITAL LINE-CrossOver-Steg
Hanika-RECITAL LINE-CrossOver-Hochglanzoberfläche
High-gloss finish
Hanika-RECITAL LINE-CrossOver-Pedal
Hanika-RECITAL LINE-CrossOver-Verstärker-Regler
Hanika-RECITAL LINE-CrossOver-Verstärker-dunkel
Dunkle Ausführung
Hanika-RECITAL LINE-CrossOver-Verstärker-Helle-Ausführung
Helle Ausführung

You'd like to see, touch and play HANIKA's CrossOver at your local dealer?

The model may be tested ‘live’ locally and, of course, purchased directly at the following retailers.

Availability is handled and updated individually by the dealers themselves.